Filter
Top Products
RB-525-B0435
11. Storage and Maintenance
11.1 Reloading Printer Paper
1) Remove a printer cover and take a printer paper shaft
out.
2) Lift a printer cutter part and pull up a head-up lever.
3) Set a roll of printer paper, paying attention to direction
of the paper rolled up.
4) Insert the loose end of the paper behind a rubber roller.
Press print switch more than one second to feed the
paper out.
5) Draw the paper through the printer cutter slot and
lower the head-up lever and the printer cutter back to
the original positions.
6) Draw the paper a cutter slot of a printer cover and
reattach the printer cover to complete the procedure.
The loose end of the paper should be drawn
forward in a counterclockwise direction.
NOTE
Always use the specified printer paper only.
The paper other than the specified one may
cause a paper jam or fade in printing.
Never pull the paper out.
Pulling the paper may cause the paper
output incorrectly or jammed.
NOTE
Printer cutter part
Printer cutter part
Head-up lever
Rubber roller
Knurl