Filter
Top Products
RB-525-B0436
11.2 Fuse Rep lacement
CAUTION
When replacing a fuse, unplug the power cord from the unit
before removing the fuse holder.
You may be in danger of electric shock if you remove the fuse
holder without unplugging the power cord.
When a fuse is blown, remove a fuse holder at the side of a main unit for replacement.
Pushing the fuse holder, rotate it in the direction of the arrow below and you can remove it.
Fuse Holder
Fuse
Rotate the holder counterclockwise.
11.3 Storage
(1) Points to be checked for long-term storage
Turn the power switch OFF.
Remove the power cord from the outlet.
Lower the optical unit to the bottom (original position).
Secure the body with the anti-sliding screw lock.
Put a dustproof cover on the optical unit.
(2) Notes on storage environment
Avoid storage under the following conditions.
Where dust accumulates.
Where water may get on the unit.
Where temperature and humidity are high.
Where sunlight directly contacts.
Unstable and/or high place.
Always follow the environment conditions below for storage.
Environmental Conditions
Temperature Relative Humidity
10 ~ 60 below 70
Always use the specified fuse (T2A 250V).
NOTE
Always check above whenever you store or do not use KW-2000 for a long time.
When you reuse the instrument after long-term storage, operate according to instruction in
' 5. Preparation.'