Filter
Top Products
RB-525-B0429
6.9 Data Scre en Function
Data screen function allows you to check measurement results saved in the memory on the screen.
(1) Select 'ON' in 'DATA SCREEN' of the Menu screen.
(2) After the measurement, press switch, and
the data screen will appear as shown on the left.
(3) Displaying the data on the screen, press switch to change over the display as below.
All data of right eye
(RIGHT)
All data of left eye
(LEFT)
Refractive data
(REF)
Representative data
(ECONO)
(4) When you wish to print out the measurement data, press switch again.
(5) Press the measurement start switch to go back to the measurement screen.
** RIGHT**
R)
SPH
CYL
AX
- 4.75 - 0.25 62
- 4.75 0.00
- 4.75 0.00
- 4.75 0.00
- 4.75 0.00
- 4.75 - 0.25 62
- 4.75 0.00
- 4.75 0.00
- 4.75 0.00
- 4.75 0.00
- 4.75 0.00
mm
D
AX
R1) 7.59 44.50 120
R2) 7.57 44.50 107
AVE 7.58 44.50
CYL 0.00
S 7.58 T 7.66
V 7.51 H 7.55
I 7.84 N 7.71
e(ver) 0.554
e(hol) 0.396
e(ave) 0.475
PRESS START SW >
RETURN
START MANUAL AUTO3 AUTO5
REF NORMAL QUICK( 3)
STEP 0.25 0.12
VD(mm) 0 10 12 13.5 15
CYL
KERATO RADIUS DIOPT
PRINT FORM ALL ECONO OFF
PRINT OUT TOP BOTTOM
DATA SCREEN ON OFF
W-D(cm) OFF 30 35 40 45
TARGET LIGHT BRIGHT NORMAL DARK
SCREEN ADJ.
Displaying measurement data on the screen
When 'DATA SCREEN' is 'ON', the setting
of 'PRINT FORM' is invalid (see '6.7.1 Each
Item Description'.
NOTE
'I' mark will be indicated on the left side of
each refractive data as shown below when
you measure with IOL measurement mode.
Example: SPH CYL AX
I - 4.75 - 0.25 62
NOTE