Filter
Top Products
RB-525-B0425
III. RS232C Setting Function
With this function, you can send the measurement data
to an external computer through an interface. The data is
sent using ASCII CODE.
When you select this menu, the screen on the left
will appear and function of each switch will change
as shown.
Each Item Description
1. BAUDRATE : selection of a transmission rate for a serial interface.
BAUDRATE option Standard setting
38400bps
19200bps
9600bps
4800bps
2400bps
2. CHARACTER : selection of data bit
CHARACTER option Standard setting
8
7
3. PARITY : selection of transmission data check.
PARITY option Standard setting
EVEN
ODD
NONE
4. STOP BIT : selection of code to terminate data output.
STOP BIT option Standard setting
2
1
Move the cursor downward
t
o select the item you wish to
change.
Change the setting of the item selected.
The display changes every time the switch is
pressed. Press the return switch at any given
setting.
Return switch to go back the
measurement mode.