RB-525-B0415
6.4 Print Out
Normally you can print out the measurement result by pressing PRINT switch after the measurement.
(The icon of PRINT switch in the monitor turns into blue during printing.)
A maximum of ten data is recorded for each eye and the most reliable among them is indicated as an
optimum value. The optimum value is indicated when each eye is measured over three times only.
The printout format, ALL, ECONO and OFF, can be set on the MENU screen.
∗
ALL : prints out a maximum of ten refractive data for each eye.
Optimum values only are printed out for the others except for the refractive data.
∗
ECONO : prints out only optimum values of all measurement data.
∗
OFF : prints out no data.
Regardless of the setting of the printout format, the measurement data stored in memory will be cleared
when the measurement start switch is pressed following the PRINT switch.
Keratometry data
Refractive data
Right eye data
Sample printout when PRINT FORM is set for ALL
Message area
Optimum value
indicated when
each eye is
measured more
than three times.
Left eye data
Pupillary distance
Date and time display
No. 00001
NAME
2002 11 20 14:29
VD=12
<R> SPH CYL AX
- 4.75 -0.25 62
- 4.75 -0.00
- 4.75 -0.00
----------------------------------------
- 4.75 -0.00
<R> mm D AX
R1 7.59 44.50 120
R2 7.57 44.50 30
AVE 7.58 44.50
CYL 0.00
<L> SPH CYL AX
- 4.50 -0.75 90
- 4.50 -0.75 90
- 4.50 -0.75 89
----------------------------------------
- 4.50 -0.75 90
<L> mm D AX
R1 7.59 44.50 120
R2 7.57 44.50 30
AVE 7.58 44.50
CYL 0.00
PD = 64
MODEL KW-2000(V1.00)
No. 00001
NAME
2002 11 20 14:29
VD=12
<R> SPH CYL AX
- 4.75 -0.00
<R> mm D AX
R1 7.59 44.50 120
R2 7.57 44.50 30
AVE 7.58 44.50
CYL 0.00
<L> SPH CYL AX
- 4.50 -0.75 90
<L> mm D AX
R1 7.59 44.50 120
R2 7.57 44.50 30
AVE 7.58 44.50
CYL 0.00
PD = 64
MODEL KW-2000(V1.00)
Keratometry data
Refractive data
Sample printout
when PRINT FORM is set for
ECONO
Message area
You can print out registered characters in the range of 22 characters/line x 2 in the message area.
For registration, refer to
'6.7.2 Option Function: I. Message Input Function'
.