Filter
Top Products
CAUTION: Mower lift arms can pinch ngers. Lift arms are
spring loaded and can snap back when deck is removed.
Lock lift lever before pulling pin to remove mower deck.
GXAL42026—UN—04MAR13
5. Remove spring locking pins and washers (F) and disconnect rear
draft arm (G) and adjustable lift links (H) on each side.
GXAL42027—UN—04MAR13
107 cm (42 in.) mower deck shown
6. Remove spring locking pin (I) and washer and front draft rod (J) from
mower deck bracket (K).
7. Remove mower drive belt from drive sheave (L).
8. Remove wood blocks from both sides and slide mower deck out from
under the machine.
9. When operating the machine without the mower deck:
• Remove front draft rod from machine and attach it to the mower
deck.
GXAL42028—UN—05MAR13
107 cm (42. in.) mower deck shown
• On 107 cm (42 in.) mower deck only: Push mower engagement
drive cable into clip (M) and hook end of cable spring with
hardware (N) into peg on left side of machine frame.
Installing Mower Deck
1. Park machine safely. (See Parking Safely in SAFETY section.)
2. Put attachment lift lever in the transport position.
3. Slide mower under machine.
4. Put wood blocks under each side of mower deck.
5. Put attachment lift lever in lowest position.
GXAL42029—UN—04MAR13
6. Fasten rear draft arm (A) and adjustable lift link (B), on each side,
with washers and spring locking pins (C).
Service Mower
40