Filter
Top Products
4 – English
N
Never use the Rider if persons, especially
children or pets, are in the immediate vicinity.
Never carry passengers on
the Rider or on its tools
Accelerator pedal forward
Neutral position
Accelerator pedal reversing
Starting instructions
Read the operator’s manual
Checking the engine oil level
Check the oil level in the hydrostat
Lift up the cutting unit
Hydrostat pedals in the neutral
position
Apply the parking brake.
Use the choke if the engine is cold.
Starting the engine
Disengage the parking brake before
driving
Drive very slowly
without the cutting
unit
Do not insert your hands or
feet under the cover when
the engine is running
Switch off the engine and remove
the ignition cable before carrying
out repairs or maintenance
CE conformity marking
KEY TO SYMBOLS
These symbols can be found on the Rider and in the operator’s manual.
Study them carefully so you understand their significance.
Read the operator’s manual.
Neutral Fast Slow Engine off Tyre
pressures
Choke Fuel
Oil level
Cutting height Reversing Forward Ignition
Use hearing
protection
Hydrostatic free
wheeling
Parking brake
Warning
WARNING!
Rotating blades
WARNING! Risk of the
Rider overturning
Never drive directly
across a slope
Noise emission to surroundings in accordance
with the directive of the European Community. The
machine’s emission is indicated in the TECHNI-
CAL DATA chapter and on the decal.