Filter
Top Products
38 – English
MAINTENANCE
Replacing the Hydraulic Pump’s Drive
Belt
Pro 18 AWD
Removal
1. Remove the transmission cover.
8009-603
2. Unhook the spring on the belt tensioner.
3. Remove the belt guide for the centre belt.
8009-637
4. Pull off the centre belt from the engine’s pulley
and pull out the rear section. A used belt can be
pulled downwards. When the belt is new, the
centre belt must be pulled off of its front pulley
whereupon it can be moved downwards from the
engine pulley so that the rear part can be pulled
out.
8009-727
5. Remove the nut on the cooling fan. Counter hold
using a punch in one of the holes on the
underside of the fan when the nut is loosened.
8009-638
8009-726