Filter
Top Products
44 – English
MAINTENANCE
Removing the Cutting Unit
1. Follow ”The Cutting Unit’s Service Position”,
points 1-9 to put the cutting unit in the service
position.
2. Remove the bolt (3) and lift off the cutting unit.
WARNING!
Wear protective glasses when
dismantling the cutting unit. The
springs that tension the belt can
fly off and cause personal injury.
7. Fit the anti-scalp rollers in position
8. Fit the front cover.
9. Secure the springs on the adjuster pulley.
There are two designs, see the figures.
8009-439
8009-440
8009-674
8009-598