Filter
Top Products
48 – English
MAINTENANCE
The Cutting Unit’s Service Position
In order to provide good accessibility for cleaning,
repair and servicing, the unit can be set in the
service position. The service position means that
the unit is raised and locked in the vertical position.
Placing in the Service Position
1. Place the machine so it is flat. Activate the
parking brake (A). Set the cutting deck to the
lowest cutting height and lower the cutting unit
(B).
3. Loosen the two anti-scalp rollers, located under
the front cover.
2. Remove the front cover by loosening the split
pin. (Complete instructions for the service
position can be found on the inside of the front
cover).
8009-587
6017-219
6017-220