English – 33
8009-433
8009-434
8009-436
8009-435
8009-153
MAINTENANCE
Checking the Safety System
The Rider is equipped with a safety system that
prevents starting or driving under the following
conditions.
The engine should only be possible to start when
the cutting unit is in its raised position and the
parking brake is applied.
The driver does not need to be seated in the
driver’s seat.
Make daily inspections to ensure that the safety
system works by attempting to start the engine
when one of the conditions is not met. Change the
conditions and try again.
Check that the engine stops if you temporarily
move out of the driver’s seat while the cutting unit is
lowered or the hydrostat pedals are not in the
neutral position.
Starter
Ignition system
Works
Does not work