Filter
Top Products
14 – English
8009-486
8009-487
PRESENTATION
Lifting Lever for the Cutting Unit
The lifting lever is used to put the cutting unit in
either the transport or mowing positions.
1. Pull the lever backwards to the locked position
to engage the transport position.
The unit is raised and the blades stop rotating.
2. Depress the lock button and move the lever
forwards to engage the mowing position.
The unit is lowered and the blades begin to
rotate.
3. The lever can also be used to temporarily
adjust the cutting height, for example, with a
small mound in the lawn.
Raising the cutting unit
Lowering the cutting unit
8009-488
Cutting Height Adjustment Lever
Using the lever, the cutting height can be adjusted
in 7 different positions.
Combi 94 30-90 mm
(1 3/16" - 3 1/2")
Combi 103-unit 40-80 mm
(1 9/16" - 3 1/8")
Combi 112 40-100 mm
(1 9/16" - 3 7/8")
It is important that the air pressure in both front
wheels is equal, 60 kPa / 0.6 bar / 9 PSI, to
produce an even cutting height.