Filter
Top Products
English – 57
2. Pedal Mechanism in Frame Tunnel
Lubricate the pedal mechanism in the frame tunnel.
Remove the cover of the frame tunnel by loosening
the screws (two on the steering servo housing).
Work the pedals and lubricate the moving parts with
an oilcan.
Lubricate the cables to the brake and drive pedals
with an oilcan.
Lubricate the point ”Chains in the Frame Tunnel”
before replacing the cover to the frame tunnel.
LUBRICATION
8009-345
8009-505
6020-022
3. Chains in the Frame Tunnel
Remove the cover from the frame tunnel, see point 2.
Lubricate the chains in the frame tunnel with an
oilcan or chain lubricant spray for motorcycles.
Lubricate the steering cable pulley axle with
grease. Move the pulleys to one side and brush
grease on the axle.
Replace the cover on the frame tunnel.