Filter
Top Products
English – 41
MAINTENANCE
Replacing the Front Belt Pro 15, Pro 18
Dismantling
The entire belt is removed according to the
following when a snow blade is to be attached to
the machine.
1. Remove the cutting unit.
2. Loosen the belt guides and the support pully.
3. Loosen the wheel on the belt tensioner.
4. Ease off the belt from the middle pulley and
remove the belt.
Assembly
1. Fit the belt on the centre pulley.
2. Move the belt into position and fit the belt on the
belt tensioner.
3. Position the belt on the support pulley and
tighten the belt guide.
4. Fit the cutting equipment.
8009-227
8
9
Replacing the Front Belt Pro 18 AWD
Dismantling
The entire belt is removed according to the following
when a snow blade is to be attached to the machine.
1. Put the cutting unit in the service position.
2. Pull the centre belt off of the centre pulley. The
belt becomes slack when the cutting unit is lifted.
3. Take off the front belt from the centre pulley and
remove the belt.
6017-227
Assembly
1. Position the belt from the front. Pull the belt on
the outside of the runner pulley and on the
inside of the adjuster pulley.
8009-684
8009-596