Filter
Top Products
33
2000 Owner’s Manual
CHANGE WATER
Every four months the top line of your LCD will read “CHANGE
WATER” and the message “TURN POWER OFF, DRAIN & REFILL
SPA...PUSH AND HOLD ICON PAD MORE THAN 3 SECONDS
TO RESET THIS MESSAGE” will scroll from right to left on the bot-
tom line of the display. To reset this message, push and hold the
Dimension One Spas ICON (logo) pad located at the right hand side of
the control for 3 seconds.
CHANGE VISION CARTRIDGE
When “CHANGE VISION CARTRIDGE” is displayed on the LCD, the
system is telling you that it is time to replace it. To reset this message,
push and hold the Dimension One Spas ICON (logo) pad located at the
right hand side of the control for 3 seconds.
NOTE: If you purchased a Vision cartridge subsequent to the initial
start up of your spa, please follow the programming instructions for
VISION as outlined in the preceding section to set the six month time
frame.
SPA CHECK-UP
When “SPA CHECK UP” is displayed on the LCD, we recommend that
you have your spa inspected by your dealer as a preventative maintenance
m e a s u r e. To reset this message, push and hold the Dimension One Spas
ICON (logo) pad located at the right hand side of the control for 3 seconds.
NOTE: To eliminate any prompting message on the LCD the system
can be reset by pushing and holding the Dimension One Spas ICON
(logo) on the right end of the control for 3 seconds. If the error still
exists the message will redisplay.