98 C2674M-C (7/09)
4. To return to the live view mode, on the front panel or remote control, press STOP. Using the mouse, click the stop button .
Figure 101. Viewing Playback and Live Video Simultaneously
PTZ IN LIVE VIEW
The DX4500/DX4600 displays a PTZ control for operating and administering cameras that support PTZ functions using Pelco C, Pelco P, and D
protocols. PTZ control is also available for supported third-party dome cameras. The PTZ option must be configured for each camera channel.
• Programming: To program or clear presets, preset tours, and patterns, the SET icon must be engaged. While in PTZ programming mode,
multiple presets can be programmed.
• Activating a PTZ feature: To activate presets, tours, and patterns, the SET icon must be disengaged. The PTZ option must be configured
for each camera channel before the PTZ control is used to operate the camera. You must have administrator level permissions to configure
DX4500/DX4600 features. For information about setting up PTZ options, refer to PTZ Setup on page 29.
• The PTZ feature is available to administrator, power, and normal level users.
• No other DVR operation, other than those initiated using the PTZ control, is available when the PTZ control is displayed.
• If someone is controlling a PTZ camera using the DVR, you cannot use the PTZ function and vice versa.
• The DVR will not perform instant record when the PTZ control is displayed.
• The PTZ control has a drag and drop feature.
• The PTZ control opens in the last location in which it was used.
You can also use the Pelco KBD300A keyboard to configure and operate PTZ devices. For information about configuring PTZ features, refer to PTZ
Presets on page 101. For information about working with the KBD300A keyboard, to configure and operate PTZ devices, refer to Working With
PTZ Devices Using the KBD300A Keyboard on page 99. For information about the PTZ control and a description of its buttons, refer to PTZ
Control on page 15.
