Filter
Top Products
3-13
:PHASE
Set phase offset of FM2 relative to FM1
Data type :
Decimal Numeric Program Data
Allowed suffices :
DEG
Default suffix :
DEG
Examples: FM2:MODF:VALUE 1.5KHZ;SIN
FM:MODF:PHASE 1.2DEG
DCFMNL
Perform DC FM null operation (only for EXTDC mode)
Data type :
None
Allowed suffices :
None
Default suffix :
None
Example: DCFMNL
FM? or FM1? or FM2?
Prepares message containing information on FM setting in one of the
following formats:
:FM:DEVN <nr2>;<src>;<status>;INC <nr2>
:FM1:DEVN <nr2>;<src>;<status>;INC <nr2>
:FM2:DEVN <nr2>;<src>;<status>;INC <nr2>
where: <src> is a program mnemonic representing the source of the
modulation signal and <status> is a program mnemonic indicating
whether the frequency modulation is locally ON or OFF
Example: :FM1:DEVN 25000.0;INT;ON;INC 1000.0
FM:MODF? or FM1:MODF?
or FM2:MODF?
Prepares message containing information on FM modulation oscillator
setting in one of the following formats:
:FM:MODF:VALUE <nr2>;<shape>;INC <nr2>
:FM1:MODF:VALUE <nr2>;<shape>;INC <nr2>
:FM2:MODF:VALUE <nr2>;<shape>;INC <nr2>
where: <shape> is a program mnemonic representing the waveform
shape
Example: :FM1:MODF:VALUE 5750.00;SIN;INC 1000.00