Filter
Top Products
Telect, Inc. • USA +1.509.926.6000 • Mexico +1.52.33.3836.3700
Poland +1.48.713.239.100 • UK +1.44.1489.889500 • www.telect.com
Copyright © 2002 Telect, Inc., All Rights Reserved
Page 5-3
• For unassigned distribution or for disconnected subscribers, route the cable up and around one of the top two arcs and
spools and then plug the connector (with dust cover attached) into one of the rubber holders between the feeders and the
Patch Modules, as shown in the illustration.
5. Record splitter and subscriber assignments on the erasable label applied to the inside of the front door.
A replica of the designation label is shown in the following illustration.
Parking Unassigned Distribution Jumpers
Parking for
Unassigned
Distribution