Filter
Top Products
Telect, Inc. • USA +1.509.926.6000 • Mexico +1.52.33.3836.3700
Poland +1.48.713.239.100 • UK +1.44.1489.889500 • www.telect.com
Copyright © 2002 Telect, Inc., All Rights Reserved
Page 3-5
Telect offers a standard length of cable to fit most applications: 100 ft (30.48 m), measured from a fan-out block attached to the
Patch Module to the stub end. (Custom lengths available on request.) Telect breaks out short lengths of subunits for the shortest
probable distance from the cable clamp to the Patch Module. The subunit breakout can be increased on site. Telect includes the ca-
ble clamp for securing the cable to the bottom of the cabinet and a short length of heat-shrink tubing for covering the breakout.
72-Strand OSP Cable
Patch Module
Front
Rear
Cable Clamp
Heat-Shrink Tube
Subunits
(6, with 12, 250 µm fibers ea)
Fan-Out Blocks
(6, with transition to 12, 900 µm transparent tubes)
Transparent Tubes, Each Containing a
250 µm Fiber With an SC/APC Connector
Patch Module With Distribution Cable