Filter
Top Products
Telect, Inc. • USA +1.509.926.6000 • Mexico +1.52.33.3836.3700
Poland +1.48.713.239.100 • UK +1.44.1489.889500 • www.telect.com
Copyright © 2002 Telect, Inc., All Rights Reserved
Page 1-6
Up to 18, 1x4, 1x8, 1x16, or 1x32 Telect Splitter Modules can be installed in the splitter bulkhead at the bottom of the front compart-
ment. Each splitter module consists of the splitter, one blue “input” jumper, and either 4, 8, 16, or 32 yellow “output” jumpers. All are
2 mm jumpers, 2.1 m in length.
Splitter module installation and all of the distribution changes (patching) occur in this front compartment:
• Unassigned jumpers are routed via spools and arcs to a parking station for later subscriber assignment.
• Assigned jumpers are routed via the spools and arcs to the front of the SC/APC adapters in the front of the patch modules
for cross connection to the distribution fiber connected to the rear of the patch modules.
FEATURES
• Simple cabling scheme. Separate compartments for OSP cable (feeder & distribution at the rear) with splitter growth and
cross-connections at the front
• Patch module bulkhead swings out into front compartment for convenient adapter and connector inspection and mainte-
nance
• 30 mm (min.) bend radius control throughout cabinet & accessories
• Highest splitter density — up to 32 splits per splitter module
• Expandable. Easily add splitter modules as distribution grows
• Popular bulkhead-style modular distribution (up to 6, 72-channel patch modules)
• Bulkhead-style splitter bank for up to 18 Splitter Modules containing 1x4, 1x8, 1x16, or 1x32, premium PLC splitters
• Laser eye protection throughout. All adapters and connectors include dust caps
• Front & rear padlockable doors with wind strays (padlocks not included). Routing guide and designation chart located con-
veniently on inside of front door.
• Includes grounding bar for armored cable.
BENEFITS
• Low cost — High Fiber Density — Versatility
• Better access — full front and rear doors open wide for simple access and installation
• Simple Site Prep
• Easy Installation. Ideal for both local and remote sites
• Designed for compliance: NEMA 4, GR-771, GR-487
• Designed & Built for Growth
• Simple, straight-forward cable management, access, circuit identification.
SPECIFICATIONS & CAPACITIES
• Dimensions (Overall WxHxD): 28 x 54 x 18 in (710 x 1375 x 460 mm). See the following for detailed dimensions.
• Weight (without modules, accessories, or cabling): ~125 lb (~60 kg).
• Feeder & Distribution Cable Entrance Positions/Capacity: 16
• Cable Diameter:
3
/8 in. (9.6 mm) to 1
1
/5 in. (30 mm), max.