Filter
Top Products
4. Cabling With In-Cabinet Splicing
Telect, Inc. • USA +1.509.926.6000 • Mexico +1.52.33.3836.3700
Poland +1.48.713.239.100 • UK +1.44.1489.889500 • www.telect.com
Copyright © 2002 Telect, Inc., All Rights Reserved • Telect Publication 131220 A0
WARNING
!
WARNING! Fiber cables transmit invisible infrared light. To avoid eye damage or blindness, never look directly
into fibers or connectors.
WARNUNG! Faserkabel übertragen unsichtbares Infrarotlicht. Um eine Schädigung der Augen oder Blindheit
zu vermeiden, schauen Sie nicht direkt in die Fasern oder Stecker.
ADVERTENCIA ! Los cables de fibra transmiten luz láser o infrarroja invisible. Para evitar lesiones oculares o
ceguera, nunca mire directamente a las fibras o conectores.
AVERTISSMENT ! Les câbles à fibres transmettent un rayon laser ou une lumière infrarouge invisible. Pour
éviter toute lésion occulaire ou cécité, ne regardez jamais directement dans les fibres ou dans les
connecteurs.
Fiber installation with on-board cabinet splicing involves installing Telect’s optional splice box and distribution patch mod-
ules in the rear compartment of the MDC-CB. The feeder and distribution cables are secured to the floor of the rear com-
partment. The installer routes the fiber breakout to the splice box where it’s spliced to connectorized fiber. In turn, connec-
torized feeder and distribution fiber is routed and then terminated to the compartment interface adapters and distribution
patch modules.
SPLICE BOX INSTALLATION
Install the Model MDC-SPLC Splice Box on the inside of the rear door using the hardware provided, as shown in the following illus-
tration. (See “Accessories” Page 7-3.)
PATCH MODULE INSTALLATION
The Model MDC-P72N Patch Module is installed from and secured to the rear compartment. (See “Accessories” Page 7-3.)
To install, swing out the hinged bulkhead from the patch module’s anchor plate so that the bulkhead fits through rack and into front
compartment. (See the illustration on Page 4-3.) Then, secure anchor plate to partition wall using three acorn nuts provided. In the
front compartment, secure patch module swing-out door.
Install all intended patch modules before installing any cable.