Filter
Top Products
5 ANGLE MEASUREMENT
5-1 Measuring an Angle
Aim at the first target, then press [F3] [0 SET]
twice in succession to reset the horizontal
angle to 0.
Aim at the second target, then read the
horizontal angle.
Pressing [F4] [DISP] displays the vertical
angle.
● The [0 SET] key cannot reset the vertical angle to 0.
● Pressing the [DISP] key cycles through the sets of display items:
“H.angle/H.dst./V. dst.”, “H angle/V.angle/S.dst.”, and “H.angle/V.
angle/H.dst./S.dst./V.dst.”.
● Even though you turn the power off during a survey, the horizontal angle
displayed last time is saved, so that it is restored when the power is turned on
next time.
● When the restored horizontal angle is not necessary, reset it to 0.
36
5 ANGLE MEASUREMENT
MODE A 15°CS0
H. angle 00"00'0°
H. dst.
V. dst.
MEAS TARGET 0 SET DISP MODE
MODE A 15°CS0
H. angle 20"30'60°
H
. dst.
V. dst.
MEAS TARGET 0 SET DISP MODE
MODE A 15°CS0
H. angle 20"30'60°
V
. angle
40"05'87°
S
. dst.
MEAS TARGET 0 SET DISP MODE
PENTAX R-300 (p20-52) 10/30/02 11:08 AM Page 36