Filter
Top Products
1-2 Unpacking and Packing
Unpacking the Instrument from the case
q Set the case down gently with the lid facing upwards.
w Open the latches while pressing down on the lock (safety mechanism) and
open the lid of the case.
e Remove the instrument from the case.
Packing the Instrument in the case
q Make sure the telescope is fairly level and lightly tighten the telescope clamp
screw.
w Line up the housing marks (round yellow marks on the instrument) and tighten
the upper and lower clamp screws.
e With the housing marks facing upward, set the instrument gently in the case
without forcing it.
r Close the lid to the case and secure the latches.
1-3 Standard equipment
q Instrument
w Carrying case
e BP02 battery
r BC03/AC01 charger
t Plumb bob
y Hexagonal wrench
u Rain cover
i Quick Reference Guide (Basic , PTL and PSF procedures)
o CD-R (Basic operation & Special Functions manual)
11
1 BEFORE USING THE INSTRUMENT
PENTAX R-300 (p01-19) 10/30/02 11:21 AM Page 11