Filter
Top Products
19
2 DISPLAY AND KEYBOARD
2-4 Alphanumeric Input
The point name is inputted by the Alphanumeric keys as following.
Key Letter under Key Letter & Figure order to input
[0] [@][.][_][-][:][/][0]
[1] PQRS [P][Q][R][S][p][q][r][s][1]
[2] TUV [T][U][V][t][u][v][2]
[3] WXYZ [W][X][Y][Z][w][x][y][z][3]
[4] GHI [G][H][I][g][h][i][4]
[5] JKL [J][K][L][j][k][l][5]
[6] MNO [M][N][O][m][n][o][6]
[7] [ ][?][!][_][ ][^][|][&][7]
[8] ABC [A][B][C][a][b][c][8]
[9] DEF [D][E][F][d][e][f][9]
[.] [.][,][:][;][#][(][)]
[+/-] [+][-][*][/][%][=][<][>]
2-5 LD POINT, Laser Pointer
The Laser pointer function turns the laser beam on continuously to become the
aiming point so that visual confirmation is possible.
q When the [LD POINT] key is pressed after pressing the [Laser] key, the Laser
pointer function is turned on. The Laser indicator is turned on and the “”
mark on the left of the screen blinks while the Laser pointer function is
operating.
w If the [Laser] key is pressed and the [LD POINT] key is pressed while the
Laser pointer function is operating, the Laser pointer function is turned off.
● The beam of the sun is strong and visual confirmation is difficult in daytime
when outdoors.
● The laser beam is designed not to be able to observe through the telescope.
● Please visually align the laser beam to the target and mark the center.
Confirm the alignment (horizontal and vertical ) before measuring when
performing accurate work like stake out when using the Laser pointer function.
Also refer to 10-10. The EDM beam axis.
● Please do not look at the laser source of beam directly.
PENTAX R-300 (p01-19) 10/30/02 11:21 AM Page 19