Filter
Top Products
4-2 Adjusting LCD Contrast
Press [F4] while holding down the Illumination
key to access the screen for adjusting LCD
contrast.
Pressing [F1] [ ] will lighten the
contrast,while pressing the [F2] [ ] will
darken the contrast.
Press [ENT] to exit adjustment mode and
return to the previous screen.
● Pressing the Illumination key views the F3-RETICLE, F4-LCD and F5-ILLU.
● LCD contrast may be adjusted as necessary at any time.
● The contrast may be adjusted to any one of 25 levels.
● LCD contrast may be unappealing under certain environmental conditions
such as high temperature. Adjust the LCD contrast as described above in
such situations.
34
4 TURNING THE POWER ON
ENT
LOW HIGH
0
7
25
LCD DENSITY ADJ
ENT
LOW HIGH
0
7
25
LCD DENSITY ADJ
MEAS TARGET 0 SET DISP MODE
MODE A 15°CS0
H. angle 40"39'85°
H
. dst.
0000000°
V
. dst.
000000°
PENTAX R-300 (p20-52) 10/30/02 11:08 AM Page 34