Filter
Top Products
9445 Printer Online Emulation
The 9840 printer supports 94x5 emulation. You can send 94x5
data streams to the 9840 printer.
Refer to your 9445 Programmer’s Manual for information about
94x5 data streams.
Ordering Programmer’s Manuals
The Packet Reference Manual, which describes how to create
format and batch packets for printing labels, how to configure the
printer online, how to diagnose printer error messages, and how
to perform other advanced techniques can be downloaded from
our web site. You can print this manual or order a hard-copy
version (part number TC9800PM).
Connecting the Power Cable
1. Plug the power cable into the socket. Plug the other end of
the cable into a grounded electrical outlet.
2. Turn on the printer. Press ( I ) to turn on and ( O ) to turn off
the printer.
For information about replacing the fuse, see Chapter 5, "Care
and Maintenance."
Establishing Communications
Before the printer can accept print jobs from the host, you must:
◆
Connect the communication cable to the printer and to the
host.
◆
Set the communication values on the printer to match those at
the host. (Only required if you are using the serial port.)
◆
Make sure the printer is off before connecting the cable to the
communication port.
1-2 Getting Started
Rev. A 10/98