Filter
Top Products
11. Rotate the take-up core until the leader is past the printhead
and remove any slack in the ribbon by turning the take-up reel
clockwise.
12. Hold the printhead assembly by the printhead tab while
pressing down on the printhead release.
13. Close the printhead by pressing down on the thumb well until
you hear it click into place. Close the cover.
Using a High Energy Ribbon
High energy ribbon is an option for the 9840 printer. It enables
you to print on high energy (TUFF-MARK®) supplies.
When you select high energy ribbon for the printer setting, you
are setting the printer to a higher printing temperature. Select
this setting only after you have loaded a high energy ribbon and
supply or it may damage your printhead. To select a high energy
ribbon, send the supply setup packet everytime you turn on the
printer.
Thumb Well
3-4 Loading Ribbon
Rev. A 10/98