Filter
Top Products
411 Framing error (baud rate mismatch).
412 Flow control mismatch.
413 Receive buffer is full. Check flow control settings.
414 Internal keyboard buffer is full or you need a new
keypad.
427 Format name must be 1 to 8 characters inside quotes or
a printer-assigned name ("").
428 Batch name is invalid or graphic not found.
429 A field number appears more than once in a format.
430 The format uses a graphic file that cannot be found.
433 The batch references a field number that does not exist
in the format.
497 Error occurred during the parallel port loop back test.
499 Error occurred during the serial port loop back test.
Data Formatting Errors
Errors 571 to 618 are data formatting errors. This type of error
happens when a field prints incorrectly. Your System
Administrator can correct the format, batch, or graphic packet and
send the print job again. For errors 571 to 614, the printer will
still print, but the data may be incomplete, missing, or wrong.
Error Description/Action
571 UPC or EAN bar code data length in the batch doesn’t
fit the format.
572 Batch data doesn’t fit the format, the field contains
blanks, or data mismatch.
6-10 Troubleshooting
Rev. A 10/98