Filter
Top Products
LOADING SUPPLIES 2
This chapter describes how to load:
◆
a roll of supply
◆
fan-fold supply
◆
a roll of tag supply.
There are three types of supplies:
Thermal Direct specially treated thermal supplies that do not
use a ribbon for printing.
Thermal Transfer standard supplies that require a ribbon for
printing.
High Energy scratch, chemical, and temperature resistant
supplies that require a ribbon able to
withstand high temperatures. See "Using a
High Energy Ribbon" in Chapter 3 for more
information.
If you are using thermal direct supplies, do not load a ribbon.
If you switch from black mark to die cut supplies, make sure the
DIP switches are set correctly. The System Administrator can also
send the supply setup packet to change the supply type. Refer to
the Packet Reference Manual for more information about sending
the supply setup packet.
Loading Supplies 2-1
Rev. A 10/98