Filter
Top Products
PRINTING 4
This chapter explains how to
◆
use on-demand mode printing.
◆
print an error label and batch separators.
◆
adjust the print positions.
Printing
The host sends online packets containing print jobs to the printer.
1. Turn on the printer.
2. Download a format and a batch. Refer to the Packet
Reference Manual for information on downloading print jobs.
3. The printer prints a strip of labels.
4. Remove the printed labels.
On-Demand Mode Printing
When the 9840 printer is operating in the on-demand mode, the
next label prints when the previous label is removed from the
printer or when Feed is pressed. The Paused light blinks until all
the labels in the batch are printed.
If you have purchased the optional peel module, you must use
on-demand printing with peel mode. If you are using peel mode,
remove the excess backing paper by pulling up across the
saw-toothed tear edge. Make sure the backing paper tears at the
edge. Hold the leading edge of peeled labels when printing on
stock longer than six inches. The minimum feed length for peel
mode is 1.5 inches. You must use non-perforated supplies for
peel mode.
Printing 4-1
Rev. A 10/98