Filter
Top Products
CARE AND MAINTENANCE 5
This chapter tells you how to
◆
clear label jams
◆
clean the printhead and platen roller
◆
replace a printhead
◆
replace a fuse
◆
adjust print contrast.
CAUTION
Do not use sharp objects to clean the printhead. This
may damage the printer and void your warranty.
Clearing Label Jams
When you are printing and a jam occurs, the Supplies light on the printer’s
front panel blinks. To clear the jam:
1. Turn off the printer and open the cover and printhead assembly.
2. If necessary, remove the label roll and ribbon.
3. Remove the jammed labels and reload the label roll.
4. Close the printhead assembly and turn on the printer.
5. Press Feed to position the supply under the printhead.
Care and Maintenance 5-1
Rev. A 10/98