Filter
Top Products
5. Close the printer’s cover.
6. Press Feed to position the supply under the printhead.
Using the Optional Tear Bar
Tear labels against the tear bar. You cannot tear tags with the
tear bar. Note the following change to loading labels if you have
purchased the optional tear bar:
Slide the supply between the tear bar and peel bar.
Do not tear both label and backing paper at the same time.
◆
Tear labels against the tear bar.
◆
Tear backing paper against the tear edge.
Tear Bar
Peel Bar
Backing Paper
Tear Edge
2-8 Loading Supplies
Rev. A 10/98