Filter
Top Products
Supply Position Adjusts the machine to print at the vertical 0,0
point on the supply. Increase the supply
position to move print up, decrease to move
print down on the label. The range is -300 to
300 dots.
The supply position adjustment should only
be made on inital printer setup. For format
adjustments, change the print position.
Print Position Adjusts where data prints vertically on the
supply. Increase the print position to move
print up, decrease to move print down. The
range is -99 to 99 dots.
Margin Position Adjusts where data prints horizontally on the
supply. Increase the margin position to move
print to the right, decrease to move print to
the left. The range is -99 to 99 dots.
Cut Position Adjusts where the tag is cut. The printer
adjusts the cut position according to the black
marks on the supply. You may need to adjust
the cut position up or down for aperture
supplies. Increase the cut position to move
the cut up, decrease to move the cut down.
The range is -300 to 300 dots.
Printing the Euro-Dollar Symbol
You can print the Euro-Dollar symbol (c) online by using ~192
(ASCII) code in the data stream. Your System Administrator can
also select the Euro-Dollar symbol by sending the Monetary
Formatting Packet (packet D). If you have purchased the optional
keypad, you can select Euro-Dollar from the Defaults Monetary
Sign Menu.
4-4 Printing
Rev. A 10/98