Filter
Top Products
Button Functions
Feed:
◆
Prints a label in the on-demand mode.
◆
Feeds a blank label if there is no print job.
◆
Prints a label with error information that is
useful to your System Administrator if an
error is displayed.
◆
Cuts the supply when pressed and held for
two seconds if a knife is installed.
Pause: Pauses the current print job or resumes a
paused print job.
Feed and Pause: Prints a test label when you press the buttons
at the same time.
Feed and Clear: Allows you to adjust print positions from
paused mode. See "Adjusting Print
Positions" in Chapter 4 for more information.
Clear:
◆
Clears an error.
◆
Cancels the current print job.
◆
Cancels all queued print jobs if pressed
for two seconds.
To cancel a single or all queued print jobs, the printer must be in
paused mode before Clear is pressed.
Status Code Box
The status code box displays a three-digit error code to identify
any problem the printer may have. For a description of the
problem, look up the error code in Chapter 6, "Troubleshooting."
If there is no error, the display will be blank.
Getting Started 1-7
Rev. A 10/98