Filter
Top Products
Printing an Error Label
If the printer displays a data error (errors
0-499), press Feed to print an error label
and continue printing. See your System
Administrator about the error label.
Clearing Batches
All batches are cleared when the printer is turned on. You can
also clear all or a single batch by pressing Clear after the printer
is paused. See "Using the Control Panel" in Chapter 1 for more
information.
Using Batch Separators
A batch separator is a striped label that prints in between
batches. For non-indexed supply, the batch separator is always
six inches long. If you have the optional 928 stacker installed,
the batch separator is 3.66 inches long. The name of the batch is
shown on the batch separator.
To use batch separators, refer to the Packet Reference Manual.
4-2 Printing
Rev. A 10/98