Filter
Top Products
Ditch
JS56696,00009E8 1916MAY111/1
Create Best Fit Drain Design
Surface Water Pro Plus
Select MENU softkey >> GREENSTAR 3 PRO softkey
>> SURFACE WATER PRO softkey >> DITCH tab >>
PROFILE VIEW button >> EDIT DRAIN button.
The CREATE/EDIT DRAIN screen provides the ability to
create or edit a drain design associated with a ditch track.
The map shows the portion of the survey elevation that
is highlighted on the FullView Map.
NOTE: The drain generated is a black line.
Cut Volume is calculated based on Implement
Width. Check before designing drains.
Best fit drain provides the operator with the ability to create
a drain design that utilizes existing ditch track vertical
profile while minimizing the amount of soil moved. This
is dependent upon the input parameters. It is possible
to get a NO SOLUTION with this feature. If software
fails to create a drain design, update image and adjust
parameters in Step 2 to produce a valid drain design.
1. Select drain type (A)—Best Fit.
2. Input: MIN Slope (%) (B), MAX Slope (%) (C), MIN
Cut (in.) (D), MAX Cut (in.) (E).
3. Select GENERATE DRAIN button (F). A black line is
displayed.
4. Drain design, visible by black line, is updated.
5. Cut Volume is updated.
PC13733—UN—17MAY11
A—Drain Type dropdown
menu
B—Minimum Slope input box
C—Maximum Slope input box
D—Minimum Cut input box
E—Maximum Cut input box
F—Generate Drain button
G—Cancel button
H—Accept button
6. Repeat steps 2 and 3 until desired drain is created.
409
061611
PN=41