Filter
Top Products
Ditch
JS56696,00009E4 1918MAY112/2
1. Drive to the HIGH POINT of the desired area for the
Ditch Track.
2. Place selected survey receiver on beginning position
for Ditch Track A (see SETUP tab for SURVEY
RECEIVER SOURCE).
3. Select NEW button (B).
4. Enter desired name for ditch track, and select Accept
button, unless AutoName has been selected.
5. Select SET A to begin recording ditch track.
6. Drive the ditch track.
7. Stop the survey receiver in the position where drain
water exits.
8. Select B to stop recording the ditch track.
A—DITCH tab
B—NEW button
PC13729—UN—17MAY11
Overhead View
PC13748 —UN—16MAY11
Set A button
PC13749 —UN—16MAY11
Set B button
405
061611
PN=37