Filter
Top Products
Instrument Panel - Elect. Cont. Earlier Engines
DPSG,OUOD007,2841 –19–27JUL06–2/2
The touch switches on the diagnostic gauge allow
quick and easy navigation through the menu to find the
information needed.
The diagram on the preceding page is a typical Main
Menu of Engine Parameters. The Main Menu has 14
entries; the first 10 are engine data parameters, and
the last four are sub-menu entry points.
Accessing the Menus
The following two rules are used for accessing the
various items on the menus:
1. To scroll through the parameter list, press
either
the UP or DOWN touch switch.
2. To select or exit a sub-menu,
simultaneously
press the UP and DOWN switches.
Selecting Engine Data Parameters
To read any of the engine parameters, press either UP
or DOWN switch (as shown on diagram) until the top
line of the display shows the desired information.
Selecting Sub-Menus
Press either the UP or DOWN switch until the top line
of the display shows the label of the desired
sub-menu. Then press BOTH the UP and DOWN
switches at the same time. This action will select the
sub-menu and the next screen on the display will list
the sub-menu items. This is also the way to access
diagnostic trouble codes (DTCs).
16-11
080706
PN=57