Safety
DX,FLUID –19–03MAR93–1/1
Avoid High-Pressure Fluids
X9811 –UN–23AUG88
Escaping fluid under pressure can penetrate the skin
causing serious injury.
Avoid the hazard by relieving pressure before
disconnecting hydraulic or other lines. Tighten all
connections before applying pressure.
Search for leaks with a piece of cardboard. Protect hands
and body from high pressure fluids.
If an accident occurs, see a doctor immediately. Any fluid
injected into the skin must be surgically removed within a
few hours or gangrene may result. Doctors unfamiliar with
this type of injury should reference a knowledgeable
medical source. Such information is available from Deere
& Company Medical Department in Moline, Illinois, U.S.A.
DX,TORCH –19–10DEC04–1/1
Avoid Heating Near Pressurized Fluid Lines
TS953 –UN–15MAY90
Flammable spray can be generated by heating near
pressurized fluid lines, resulting in severe burns to
yourself and bystanders. Do not heat by welding,
soldering, or using a torch near pressurized fluid lines or
other flammable materials. Pressurized lines can
accidentally burst when heat goes beyond the immediate
flame area.
DX,WW,HPCR1 –19–07JAN03–1/1
Do Not Open High-Pressure Fuel System
TS1343 –UN–18MAR92
High-pressure fluid remaining in fuel lines can cause
serious injury. Do not disconnect or attempt repair of fuel
lines, sensors, or any other components between the
high-pressure fuel pump and nozzles on engines with
High Pressure Common Rail (HPCR) fuel system.
Only technicians familiar with this type of system can
perform repairs. (See your John Deere dealer.)
05-7
080706
PN=22