Filter
Top Products
English - 9
1. INTRODUCTION AND SAFETY
• The robotic lawnmower must never be used
at the same time as a sprinkler. In this case
use the timer function (see
6.3 Timer
on
page 44) so the robotic lawnmower and
sprinkler never run simultaneously.
• Full compatibility cannot be guaranteed
between the robotic lawnmower and other
types of wireless systems such as remote
controls, radio transmitters, hearing loops,
buried electric animal fencing or similar.
• Metal objects in the ground (e.g. reinforced
concrete or anti-mole nets) can result in a
stoppage. The metal objects can cause
interference with the loop signal which then
can lead to a stoppage.
Transport
The original packaging should be used when
transporting the robotic lawnmower over long
distances.
To safely move from or within the working area:
1. Press the
STOP
button to stop the robotic
lawnmower. If security is set to the medium or
high level (see
6.5 Security
on page 49), the PIN
code has to be entered. The PIN code contains
four digits and is selected when you start the
robotic lawnmower for the first time. See
3.8 First
start-up and calibration
on page33.
2. Set the main switch in position
0
.
3. Carry the robotic lawnmower by the handle
found at the rear under the robotic lawnmower.
Carry the robotic lawnmower with the blade disc
away from the body.
IMPORTANT INFORMATION
Do not lift the robotic lawnmower when it is
parked in the charging station. This may
damage the charging station and/or the
robotic lawnmower. Open the cover and
instead first pull the robotic lawnmower out
of the charging station before lifting it.