Filter
Top Products
English - 59
8. MAINTENANCE
8.5 Transport and removal
Secure the machine during transport. It is important
that the robotic lawnmower is kept still when it is being
moved, for instance, between lawns.
8.6 In the event of a thunderstorm
To reduce the risk of damage to components in the
robotic lawnmower, we recommend that all
connections to the charging station are disconnected
(power supply, boundary wire and guide wire) if there
is a risk of a thunderstorm.
8.7 Blades
There are three blades on the robotic lawnmower,
which are screwed into the blade disc. All three
blades and screws must be replaced at the same
time to obtain a balanced mowing system.
There are several different types of mower blades to
choose from as accessories, with different features.
Use Husqvarna AB approved blades only. Please
contact your dealer for more information.
To replace the blades:
1. Set the main switch in position 0.
2. Wear protective gloves.
3. Turn the robotic lawnmower upside down.
4. Rotate the skid plate so that its hole aligns with
the screw for the blade. Only applicable for
Automower
®
308.
5. Remove the screw. Use a straight slot or
cross-tip screwdriver.
6. Remove the blade and the screw.
7. Screw on the new blade and the new screw.
WARNING
Always use original blades and
screws when replacing. Only
replacing the blades and reusing the
screw can result in a screw wearing
during mowing and shearing. The
blades can then be propelled from
under the body and cause serious
injury.