Filter
Top Products
English - 11
2. PRESENTATION
2. Presentation
This chapter contains information that is important to
be aware of when planning the installation.
Installing a Husqvarna robotic lawnmower involves
four main components:
• A robotic lawnmower that mows the lawn by
essentially operating in a random pattern.
The robotic lawnmower is powered by a
maintenance-free battery.
• Charging station, where your robotic lawnmower
returns when the charge level in the battery
becomes too low.
The charging station has three functions:
• To send control signals along the boundary
wire.
• To send control signals along the guide wire so
that the robotic lawnmower can find the
charging station.
• To charge the robotic lawnmower battery.
• A transformer, which is connected between the
charging station and a 120V (230 V) wall socket.
The transformer is connected to the wall socket
and to the charging station using a 33 ft (10 m)
long low voltage cable. The low voltage cable
must not be shortened or extended.
A 66 ft (20 m) low voltage cable is available to
purchase as an accessory. Please contact your
dealer for more information.
• Loop wire, laid in a loop around the robotic
lawnmower’s working area. The loop wire is laid
around the edges of the lawn and around objects
and plants that the robotic lawnmower must not
run into. The loop wire is used both as a
boundary wire and a guide wire.
The loop wire supplied for the installation is
660 ft (200 m) long (492 ft [150 m] for the
Automower
®
305). If it is not long enough, more
loop wire can be purchased and spliced onto the
existing loop wire with an original coupler.
The maximum permitted length for the loop wire is
820 ft (250 m).