Filter
Top Products
English - 57
8. MAINTENANCE
Charging station
Store the charging station and transformer indoors.
The boundary wire and the guide wire can be left in
the ground. The ends of the wires should be
protected from damp by putting them in a container
with grease for instance.
8.2 Service
Leave your robotic lawnmower with a dealer for
service prior to winter storage. This is essential in
order to keep the robotic lawnmower in good
condition.
Service usually includes the following:
• Thorough cleaning of the body, the chassis, the
blade disc and all other moving parts.
• Testing of the mower's function and components.
• Checking and if required replacement of wear
items such as blades and bearings.
• Testing the mower's battery capacity as well as a
recommendation to replace battery if necessary.
• If necessary the dealer can also load the robotic
lawnmower with new software, including new
features where applicable.
8.3 After winter storage
Check whether the robotic lawnmower, contact strips
or charging strips need to be cleaned before using. If
the charging or contact stripes appear to be burnt,
clean them using fine grade emery cloth. Check also
that the robotic lawnmower’s time and date are correct.
8.4 Cleaning
It is important to keep the robotic lawnmower clean.
A mower with large amounts of grass stuck to it will not
cope as well with slopes. It is recommended to clean
using a brush and a spray bottle with water.
IMPORTANT INFORMATION
Never use a high-pressure washer or even
running water to clean the robotic
lawnmower. Never use solvents for cleaning.