Filter
Top Products
44 - English
6. MENU FUNCTIONS
6.3 Timer
The lawn should not be cut too often to obtain the best
mowing result. Consequently, it is important to limit the
operating time using the timer function if the working
area is less than the robotic lawnmower's working
capacity. When the robotic lawnmower is allowed to
mow too much, the lawn may appear flattened.
Besides, the robotic lawnmower is subjected to
unnecessary wear.
The timer function is also an ideal tool to control which
periods the robotic lawnmower should not mow, for
example, when the children are playing in the garden.
The factory setting for the timer is 05:00-24:00
(07:00-23:00 for the Automower
®
305) and it allows
mowing every day of the week. This is normally a
suitable setting for a working area of about 960 square
yards (800 m
2
) (about 600 square yards (500 m
2
) for
the Automower
®
305).
When setting the timer, calculate that the robotic
lawnmower mows about 54 square yards (45 m
2
) per
hour and day (about 36 square yards (30 m
2
) for the
Automower
®
305).
• Work hours 1
to set start and stop times for work hours 1. Enter
each required time in hours and minutes and
press OK to confirm the entered time.
• Work hours 2:
to set start and stop times for work hours 2. Enter
each required time in hours and minutes and
press OK to confirm the entered time.
• Work days
to select the days the robotic lawnmower must
work. The robotic lawnmower will work during
the days that are ticked off.
• Reset timer
reset values to the factory settings.
To inactivate Work hours 1 or Work hours 2, enter the
time 00:00 - 00:00 to reset the timer to --:-- - --:--.
A clock symbol is displayed on the start page when the
timer settings are set. The clock symbol is black when
the robotic lawnmower is not allowed to mow due to a
timer setting and it is white when the mower is allowed
to mow.
The mower has an inbuilt standby period of about
6 hours a day (8 hours for the Automower
®
305). The
mower is parked in the charging station during this
period. See 4.2 Using the timer on page 36.
Work period 1
Work hours 2:
Week Timer
Reset timer
Timer
Installation
Security
Settings