Filter
Top Products
English - 25
3. INSTALLATION
Slopes
The boundary wire can be laid across a slope that
slants less than 10%.
The boundary wire should not be laid across a slope
that is steeper than 10%. There is a risk that the
robotic lawnmower will find it difficult to turn there.
The robotic lawnmower will then stop and the Outside
working area fault message is displayed. The risk is
at its greatest in damp weather conditions, as the
wheels can slip on the wet grass
However, the boundary wire can be laid across a
slope steeper than 10% if there is an obstacle that
the robotic lawnmower is allowed to collide with, for
example, a fence or a dense hedge.
The robotic lawnmower can
mow lawns that slope up to
10” (25 cm) every metre
(25%) inside the working
area. Areas that slope more
must be demarcated by the
boundary wire.
When a part of the working
area's outer edge slopes
more than 4” (10 cm) per
distance metre (10%), the
boundary wire should be laid
8” (20 cm) in on the flat
ground before the beginning
of the slope.