Filter
Top Products
48 - English
6. MENU FUNCTIONS
Test settings
In the Test settings menu, it is possible to test
settings for Remote start 1 and that the selected
guide width works for the garden in question.
Test OUT
The Test OUT function is used to test exit settings
and to calculate the distance from the charging
station to a remote area.
To test the settings in Remote start 1:
Dock the robotic lawnmower in the charging station
and select Test OUT. The mower will then leave the
charging station straight away along the guide wire
and begin mowing after the designated distance.
If there is a passage that the mower cannot get
through, the settings in Guide width ought to be
changed from Wide to Medium. If required, the
setting can also be changed to Narrow. The Narrow
guide width setting should only be used if none of the
other settings work for this installation. When the
Test OUT function is activated, the mower travels the
farthest distance from the wire allowed by the
selected guide width.
The figure here shows how the robotic lawnmower
travels through a passage when Guide width is set to
Medium and not to Wide.
How to measure the distance from the charging
station to a remote area:
Enter a distance which beyond any doubt exceeds
the real figure. The maximum distance that can be
entered is 1640 ft (500 m). Dock the robotic
lawnmower in the charging station and select Test
OUT. The robotic lawnmower will immediately leave
the charging station. The distance, stated in metres,
will be shown in the mower display as the mower
operates. Stop the robotic lawnmower at the required
position and note the distance. Enter the displayed
number of metres in the Distance field for the working
area in question.
If Remote start 2 has been activated, i.e. if another
option other than Never has been selected for
Proportion, these settings must also be tested.
Remote start 2 test is performed in the same way as
for Remote start 1.
Test IN
Test OUT
Corridor width
Remote start 1
Remote start 2
Test settings
Drive past wire
Remote start 1
Remote start 2
Test IN
Test OUT