Filter
Top Products
3-1
Section 3. ET Instrumentation
Installation
The weather station datalogger, power supply, sensor connection panel, communications
devices, and data retrieval peripherals are mounted in the ET enclosure at the locations
shown in Figure 3-1. Components include:
(1) ET Enclosure
(1) 4 unit Desiccant Pack
(1) Flat Point Screw Driver
(1) Power Supply Option
(1) Telecommunications Option
(1) 9-inch piece of 12 AWG ground wire
(1) Lightning rod and clamp
Logan, Utah
MADE IN USA
FIGURE 3-1. ET101 and ET106 Instrumentation Mounted on the ET Tower
ET101 ET106