Cleaning and Maintaining Your Spa
WARNING: DO NOT USE AUTOMOTIVE VINYL PROTECTANTS ON SPA COVERS OR PILLOWS.
THESE PRODUCTS ARE GENERALLY OIL-BASED AND WILL CAUSE SEVERE WATER CLARITY
ISSUES THAT ARE DIFFICULT TO CORRECT.
Multi-Purpose Cleaner (Spa finish cleaning)
Cal Spas™ Multi-Purpose Cleaner is an essential part of maintaining your spas finish. Through
normal use, the spa’s finish can accumulate dirt, oil, and calcium causing a rough feel and
unsightly scum lines. Cal Spas™ Multi-Purpose Cleaner is a low detergent, non-abrasive cleaner
specifically formulated to clean the spa without damaging its acrylic finish. The most effective
solution to minimize cleaning time is prevention. When the following steps are followed, the spa’s
finish will actually start to resist most of the elements that cause calcium build-up and make scum
line clean-up easier.
Prior to Spa Start-Up and Refilling
1. Spray Cal Spas™ Multi-Purpose Cleaner directly on to the spa’s finish.
2. Wipe clean with a clean soft cloth.
3. Repeat on heavily calcified areas.
4. Wipe spa thoroughly with a wet sponge, rinsing often with a bucket of clean water.
5. Allow spa to dry completely.
6. Apply a coat of Cal Spas™ Fast Sheen to the spa’s entire finish with a soft towel or sponge.
7. Allow Fast Sheen to dry until white and powdery.
8. Buff clean with a soft cloth, rotating frequently.
Periodic Maintenance
1. Spray Cal Spas™ Multi-Purpose Cleaner directly to the spa’s finish.
2. Wipe clean with a clean soft cloth.
3. Wipe spa thoroughly with a wet sponge, rinsing often in a bucket of clean water.
Cal Spas™ Multi-Purpose Cleaner should not be sprayed directly into the spa water. Incorrect usage of this
product will cause water clarity issues.
Fast Sheen (Spa finish protecting wax)
Cal Spas™ Fast Sheen is an essential part of maintaining your spa’s finish. Through normal use, the
spa’s finish can accumulate dirt, oil, and calcium, causing a rough feel and unsightly scum lines. Cal
Spas™ Fast Sheen is a non-oil based wax that is specifically formulated to protect the spa’s finish
from the chemicals and minerals associated with normal spa use. The most effective solution to
minimize cleaning time is prevention. When the following steps are followed, the spa’s finish will
actually start to resist most of the elements that cause calcium build-up and make scum line clean-up
easier.
Prior to Spa Start-Up and Refilling
1. Spray Cal Spas™ Multi-Purpose Cleaner directly to the spa’s finish.
2. Wipe clean with a soft cloth.
3. Repeat on heavily calcified areas.
Page 56 2005 Spa Owner's Manual
8/1/2005