Cal Spas LTR20051000 Hot Tub User Manual


 
Operating Your Spa
Page 30 2005 Spa Owner's Manual
8/1/2005
Message Meaning Action Required
- - - - - -
Temperature not current in Economy
or Sleep mode.
In Economy or Sleep mode, the pump may be off for
hours outside a filter. If you wish to see the current
spa temperature, either switch to Standard mode or
turn Jets1 on for at least two minutes.
BUF
Internal problem detected. Repair required. Contact your dealer or service
organization.
Stby
Standby Mode has been activated by
pressing a button combination on the
user panel.
Press any button to leave Standby Mode and return
to normal operation.
SF
Safety Suction. Spa is shut down. The display will show “SF” when
a vacuum switch closes. All functions will turn off
and the system will be disabled until a panel button
is pressed.