Operating Your Spa
NOTE: There is no control panel message displayed while in the standard heating mode; only the actual water
temperature is displayed.
Some spa models are equipped with the exclusive XL Heat Exchanger™, the most efficient spa heater available
anywhere. This highly innovative device heats water faster and more efficiently with no chemical build-up. For
your protection, it includes a High Limit Overheat Protection safety device that prevents spa equipment from
overheating. The XL Heat Exchanger™ works automatically and requires no maintenance.
Jets
Press the JETS button:
One pump equipment:
• Once to activate the low speed pump
• Twice to activate the high speed pump
• Three times to turn off the high-speed
One pump equipment with circulation pump:
• Once to activate the circulation pump
• Twice to activate the circulation pump and the high-speed pump
• Three times to turn off both the circulation pump and the high-speed pump
Two pump equipment without circulation pump:
• Once to activate the low-speed pump
• Twice to activate the high speed on pump 1
• Three times to activate the high speed on pump 1 and high speed on pump 2
• Four times to turn off the high speed on pump 1. The high-speed on pump 2 will remain on.
• Five times to turn the high speed off on pump 2.
Two pump equipment with circulation pump:
• Once to activate the circulation pump
• Twice to activate the circulation pump and the high-speed pump 1
• Three times to activate the circulation pump, high-speed pump 1 and high-speed pump 2
• Four times to turn off the circulation pump and high speed pump 1. High-speed pump 2 will remain on.
• Five times to turn off the high-speed on pump 2
Three pump equipment (5300 system)
• Once to activate the low-speed pump
• Twice to activate the high speed on pump 1
• Three times to activate high speed on pumps 1, 2, and 3
2005 Spa Owner's Manual Page 19
8/1/2005